TCGE-0524-IR00
Drawing Hydraulic symbol
www.eltfluid.com
For general conditions and terms of use see page S.005.
This document is Elt Fluid property and therefore data or technical specification can
not be reproduced.
Eltfluid also reserves the right to modify all the above data, at any time.
TECHNICAL DATA
HYDRAULIC
Max. working pressure: 350 bar (5.075 psi)
Flow rate: 70 l/min (18,7 gpm)
Fluid:
Viscosity:
Mineral based oil
From 15cSt to 250 cSt
Leakage: 0,25 cc/min (5 drops/min)
P max. 350 bar (5.075 psi)
Standard seals: O-ring NBR Backup ring PTFE
Cavity: SCN1020
Installation torque: 40 Nm
Max contamination level: NAS 8 ISO 4406 19/17/14
Fluid temperature range: From -20 °C to +80 °C
Fatigue cycle life: 1.000.000 cycle at 350 bar
Seals kit std.: 5AG0020
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
Pressure drop
Directional valves
5.04.002.1
Description
Check valve, designed to hold the load or block flow in application
where low leakage is requested.
Operation mode
The valve block flow from 2 to 1, while allows flow from opposite
direction 1 to 2 generating e different pressure drop based on
spring selection.
GENERAL DATA
Weight: 0,12 kg (0,27 lbs).
Ambient temperature: -30 °C a 60 °C with seals standard (NBR).
Max proof pressure: 420 bar (6.090 psi).
Flow Max: 70 l/min (18,7 gpm).
Cartridge materials: high strength steel, internal parts hardened and
grinding.
R10S-21
Check valve, poppet type
TCGE-0524-IR00
Ordering code
Elt Fluid S.r.l.
Via Ganapini, 15/2
Loc. Felina 42035
Castelnovo ne’ Monti (RE) ITALY
mail: info@eltfluid.com
P.IVA/C.F 02573790355
Seals
Housing size ports
A- Aluminium
Material std. housing
S- Steel
None (std. NBR+Polyurethane)
Y- Polyurethane
Inches
Millimeters
-
Dimensions
For other options
contact Sales dept.
Spring
1- 0,35 bar (5 psi)
2- 2 bar (29 psi)
5- 6,5 bar (94 psi)
3- 4 bar (58 psi)
7- 9,2 bar (133 psi)
None (std. only cartridge)
3B- 3/8” BSP
4B- 1/2” BSP
3S- SAE 8
4S- SAE 10
STANDARD HOUSING
Ordering code: See page 9.03.001
Material*: Aluminium/Steel
Max working pressure for aluminum body: 210 bar
Max working pressure for steel body: 350 bar
*Note: To correctly select the material, in relation to application, see page S.001.
5.04.002.2
R10S-21
R10S-21
$
5
81)$
